Tag: tech

Fallout 76 is the first and only multiplayer game in the franchise on all major platforms. But does it have cross-platform support? We have the answer here.

Reddit is completely down, as of around 30 minutes ago. This outage seems to be impacting each and every page on the internet’s favorite collection of disparate community forums. The company says it’s currently working on a fix and that the site will be back shortly, according to an official status page. The site experienced a major outage last year and was operating again in under an hour, so it shouldn’t be long. 

It seems to a backend issue and Reddit has admitted that the problem “has impacted many users on our site.” We’ll update this post when everything is going again. 

This article originally appeared on Engadget at https://www.engadget.com/reddit-is-completely-down-so-good-luck-finding-cute-cat-pictures-172755445.html?src=rss

The Anker PowerConf C200 webcam is 20 percent off right now via Amazon or directly from the company. This brings the price down to $48. The $12 dollar discount isn’t the lowest price ever for the webcam, but its dang close. In other words, this is still a fantastic deal.

The C200 is one of our favorite webcams, easily sliding into second place on our list of the best available models. We loved the easy setup, as all you have to do is plug it into your computer or docking station and start recording. It also integrates with the company’s AnkerWork software for editing and for making quick adjustments to brightness, sharpness and contrast ratio.

The default resolution is 2K, but you can adjust to 1080p, 720p or even 360p as the content requires. The field of view is similarly adjustable, so you can offer watchers an ultra-wide view of an extremely messy bedroom. It boasts dual stereo mics with omnidirectional vocal pickup and ships with a built-in lens cover.

The webcam’s autofocus is quite fast, even when compared to pricier models, and its larger f/2.0 aperture helps the image stay illuminated even in dark environments. The overall image quality isn’t quite on par with our favorite webcam, the Logitech Brio 500, but it’s also less than half the price.

We do have some complaints about the C200. It’s a bit cumbersome to adjust the angle when perched on a screen, due to the design. There’s no short neck that connects the camera to the base. It’s just one chunky piece of plastic, requiring both hands to make adjustments. Also, the provided USB-C cable is on the shorter side, so you might want to have a longer one ready to go, particularly if you use a standing desk.

Follow @EngadgetDeals on Twitter and subscribe to the Engadget Deals newsletter for the latest tech deals and buying advice.

This article originally appeared on Engadget at https://www.engadget.com/our-favorite-budget-webcam-is-20-percent-off-right-now-171843926.html?src=rss

Meta is bringing some of its existing safety features to Threads, including the Hidden Words tool. The platform — which recently hit more than 150 million users — will now allow you to filter out words, phrases and even emojis, just like you can on Instagram.

Threads will have the setting on by default and filter out anything that it deems offensive, along with content that could be irrelevant or uninteresting. You can then add other things that you want to be filtered out, such as “weight loss,” “assault” or a derogatory term. To add your own options, go to “manage custom words and phrases” and type in anything you’re sick of seeing on Threads.

The platform is also testing two additional features: muting and quote controls. The first would allow you to mute notifications specifically for any interactions with your posts. This way, you could still get alerts about new followers or tags without seeing every response. Quote controls would let you choose who can quote your post and even let you unquote yourself. Meta has yet to announce when these two features might be available to all Threads users.

This article originally appeared on Engadget at https://www.engadget.com/threads-is-getting-its-own-hidden-words-feature-170058508.html?src=rss

The Federal Communications Commission has voted to reinstate net neutrality protections that were jettisoned during the Trump administration. As expected, the vote fell across party lines with the three Democratic commissioners in favor and the two Republicans on the panel voting against the measure.

With net neutrality rules in place, broadband service is considered an essential communications resource under Title II of the Communications Act of 1934. That enables the FCC to regulate broadband internet in a similar way to water, power and phone services. That includes giving the agency oversight of outages and the security of broadband networks. Brendan Carr, one of the Republican commissioners, referred to the measure as an “unlawful power grab.”  

Under net neutrality rules, internet service providers have to treat broadband usage in the same way. Users have to be provided with access to all content, websites and apps under the same speeds and conditions. ISPs can’t block or prioritize certain content — they’re not allowed to throttle access to specific sites or charge streaming services for faster service.

The FCC adopted net neutrality protections in 2015 during the Obama administration. But they were scrapped when President Donald Trump was in office. Back in 2021, President Joe Biden signed an executive order to bring back the Obama-era rules, but the FCC was unable to do so for quite some time. The commission was deadlocked with two Democratic votes and two Republican votes until Anna Gomez was sworn in as the third Democratic commissioner on the panel last September. The FCC then moved relatively quickly (at least in terms of the FCC’s pace) to re-establish net neutrality protections.

The issue may not be entirely settled. There may still be legal challenges from the telecom industry. However, the FCC’s vote in favor of net neutrality is a win for advocates of an open and equitable internet.

This article originally appeared on Engadget at https://www.engadget.com/fcc-votes-to-restore-net-neutrality-protections-161350168.html?src=rss

The University of Maine just unveiled the world’s largest polymer 3D printer. The new printer, named Factory of the Future 1.0 (FoF 1.0), can print objects as large as 96 feet long by 32 feet wide by 18 feet high. It’s also quite speedy, relatively speaking, as it can print up to 500 pounds per hour. That’s like three people, every hour.

It can dynamically switch between printing techniques to suit different aspects of complex jobs. The printer can flip between large-scale additive manufacturing, subtractive manufacturing, continuous tape layup and robot arm operations. These technologies make the printer uniquely suited for a number of industries, including housing, infrastructure and the development of military vehicles.

Most of the stuff it makes is recyclable, so “you can basically deconstruct it, grind it up if you wish” and “do it again”, according to Dr. Habib Dagher, the Director of the Advanced Structures and Composites Center at the University of Maine. To that end, the printer prioritizes biobased materials, like wood residuals.

This tech seems like a great way to build a ton of affordable housing quickly and that’s exactly what some proponents have in mind. “Maine needs an estimated 80,000 additional homes by 2030, many specifically for households with incomes at or below the area median income,” said MaineHousing’s Development Director Mark Wiesendanger. “This effort creates another means of producing quality affordable housing, while further driving costs down, and using abundant wood residuals from Maine sawmills.” AP suggests the printer “may one day create entire neighborhoods.” The specs indicate that it should be able to make a modest single-story home in around 80 hours.

However, this is America, so it’s not like people built this thing just to help the unhoused. UMaine researchers received funding from the Army Corps of Engineers, the Department of Defense and the Department of Energy. These governmental institutions are going to want a return on their investment, so the printer will also likely be used to whip up lightweight rapidly deployable vessels, like submarines and other maritime vehicles. Senator Susan Collins called the printer “invaluable to our national security.”

The FoF 1.0 has a sibling printer on the UMaine campus, which was the previous record holder for the world’s largest 3D printer. It’s already been used to manufacture a 600-square-foot, single-family home made of wood fiber and bioresin materials. The new printer, however, is four times the size. Luckily, the two models are housed in the same location and can work on different aspects of the same projects simultaneously.

The University of Maine will soon break ground on a new research laboratory called the Green Engineering and Materials (GEM) Factory of the Future. This will be the new home of both printers, with a primary aim to “facilitate and scale up more sustainable manufacturing practices.” It will also likely house even larger printers in the future. “We’re learning from this to design the next one,” Dr. Dagher told ABC News.

This article originally appeared on Engadget at https://www.engadget.com/the-worlds-biggest-3d-printer-can-a-make-a-house-in-under-80-hours-155256122.html?src=rss

iSharing was leaking sensitive data on millions of people, experts warn.

Apple announces multiple new open-source AI models. But what does this mean for iOS and Mac users?

Two very different shows are coming to Disney Plus and Hulu that highlight two iconic creative legends.

Maximum-severity Flowmon flaw allows hackers to take over vulnerable devices.